Operation Manual

English

Create assistance message

1. Press Menu Settings Assistance SMS Message.

2. Select Edit and write the message, see Enter text

, p.5.

3. Press OK to confirm.

Note! You must write a message if you activate the SMS function.

Assistance settings

Confirm with "0"

You can activate the Confirm with "0" function. This is especially recom-

mended if there is a risk that the assistance call is answered by a voice

mail or answering service. If the recipient doesn’t press

within 60 sec-

onds the call will be disconnected and the next number in the sequence

will be called. If the recipient presses

within 60 seconds, the call is

confirmed and no further call attempts will be made (assistance se-

quence interrupted).

1. Press Menu

Settings Assistance Confirm with "0".

2. Select On to enable, or Off to disable.

3. Press OK to confirm.

Signal type

Select the notification signal type for the assistance sequence.

1. Press Menu

Settings Assistance Signal type:

• High to use loud signals (default).

• Low to use one low signal.

• Silent no sound indication, like a normal call.

2. Press OK to confirm.

Messages

Create and send text message (SMS)

Note! Before you can send any text messages, you need to save your

message centre number. The number to your service centre is supplied

by your service provider and is usually set on the SIM card. If not, you can

enter the number yourself. See SMS centre, p.26.

1. Press Menu

Messages Create new SMS.