doro MoveEasy 316
English 1 2 3 4 5 6 7 1 14 2 3 4 13 12 11 10 9 5 6 8 7 Dialling indicator Line button Left menu button/OK LEFT/messages * and ringer signal off/on R button (Recall) Speaker # and keypad lock DOWN/Phone book RIGHT/Redial Right menu key/Delete/ Redial 12 Headset jack 13 UP/Illuminate 14 Volume 8 9 10 11
Connection.................................1 The display.................................2 Base unit indicators...................2 Battery........................................3 Coverage....................................3 Making a call..............................3 Receiving a call..........................3 Volume control...........................4 Redialling....................................4 Temporary silent mode.............4 Key lock......................................
English Connection 1. Connect mains adapter and phone cable to respective wall sockets. 2. Insert the batteries(AAA 1.2V NiMH) in the handset with plus and minus terminals as directed. 3. Charge the handset with the keypad facing outwards (for 24 hours the first time). 4. Select language/date by following the instructions below. Language 5. Press { to illuminate the display. 6. Press Menu. 7. Scroll to Handset Set/Config. Poste with the scroll button ({/} ). Press OK. 8. Scroll to Language/Langue.
The display Indicator English 6 Function Shown within range of the base unit. Flashes when out of range. INT Internal call. Ring signal turned off with the * key. q Handset is connected (during calls). a Message indication*. * Caller ID/New SMS received*. H Alarm activated. Battery charge indicator. INT 1 Handset number (when using more than one handset). Base 1 The handset is connected to base unit 1. Press 19 Key lock activated. Function description for the key shown below the text, e.
Battery English Because batteries only have a certain lifespan it is quite normal that call time and standby time will decrease somewhat compared to the specifications when the telephone is used regularly. Fully-charged batteries (10 hours charging) will last for approx. 120 hours standby time or approx. 10 hours call time. These operation times apply at normal room temperature. Full battery capacity will not be reached until the batteries have been charged 4-5 times.
Volume control English Adjust the volume during a call with the scroll button ({/} ). Redialling Press Redial and scroll through the 10 last dialled numbers. Press q. Temporary silent mode When someone calls, you can press Silent to turn off the handset ring signal. Key lock Lock the keypad by pressing # until Press 19 is displayed. Unlock keypad by pressing 19. The keypad will be unlocked if the handset is placed in the base unit.
Phonebook English The phonebook can store 100 names and telephone numbers. If you subscribe to a caller ID service the name in the phonebook will be shown for incoming calls. It is possible to choose between various ring signals (VIP) for the numbers saved in the phonebook (only functions if you subscribe to a caller ID service). You can select the desired VIP melody, see the Signals chapter. However, the first signal can sound normal before the number is compared with the phonebook.
English Incoming numbers (caller ID) The display shows you who is calling and the 50 most recent incoming numbers. New SMS message/Caller ID is indicated by * in standby mode. If the same number calls in more than once it will be saved as only one entry. Please note! This function requires a subscription from your service provider. Retrieving and dialling incoming numbers 1. Press 8 . Scroll to Caller list. The number of new calls is displayed. Press OK. 2. Select New Calls or All Calls.
SMS messages English This feature requires a current Caller Id subscription to be in place and only applies to text message users (SMS). Please remember individual SMS features are country dependent and will vary or be unavailable. Further details regarding the SMS text message service are available from you local network provider. Maximum 160 signs per message. The memory can store up to 30 messages. New SMS message/Caller ID is indicated by * in standby mode.
English Read new SMS/inbox 1. 2. 3. 4. 5. Press 8 . SMS is displayed. Press OK. Scroll to Inbox. The display shows the number of messages. Press OK. Scroll to selected entry. Press Read. Read your message. Press Option. Scroll to the required selection: Use (reply/forward) Delete/Delete list Copy to Phoneb Press OK and follow the instructions in the display. Write new SMS message 1. 2. 3. 4. Press 8 . SMS is displayed. Press OK. Scroll to Write Message. Press OK.
Handset Settings 1. 2. 3. 4. English Press Menu. Scroll to Handset Set. Press OK. Scroll to required function e.g. Language. Press OK. Scroll to required setting. Press OK. Ringer Set Alarm Clock The handset’s ring signal and tones can be adjusted. An activated alarm is indicated in standby mode by H . When the alarm goes off, an audio signal is heard for 60 seconds. Press any key on the handset to turn off. The volume is determined by the set ring signal level.
Cordless Baby Monitor English If you place the handset near the child (but out of reach), then you will receive a call if the sound from the child’s room exceeds a set sensitivity level. You will then be able to hear the child for one minute. 1. Access Baby Monitor according to instructions on previous page. 2. Scroll to desired setting as below with scroll button. Activ. Activate function off/on. Call to Select internal call (applies to +1...) or external call. Level Setting of sensitivity level. 3.
System settings English System PIN is 0000 on delivery. 1. Press Menu. Scroll to Base Set. Press OK. 2. Scroll to desired function e.g. Ringer Set. Press OK. 3. Scroll to required setting. Press OK. Ringer Set Ringer Priority The ring signal of the base can be adjusted. You can decide whether all handsets should ring at once when there is an incoming call, or if one handset should start ringing before the others. You can set the number of ring signals for this function as well.
English Dial settings These settings are usually not changed. System PIN is 0000 on delivery. 1. Press Menu. Scroll to Base Set. Press OK. 2. Scroll to Dial Set. Press OK. 3. Scroll to desired function e.g. Access Code. Press OK. 4. Scroll to required setting. Press OK. Access Code Enter the digit that obtains an external line and the telephone will insert a pause automatically when a number starts with that digit. Recall Time Only for adaptation to international company switchboards.
Net. Provider English To choose a certain service provider, one would usually dial a prefix code before the actual phone number. This function will automatically select the telephone network provider, e.g.: Provider X (prefix 9301) for dialling international calls. Set up the LCR so that all phone numbers starting with 00 will be changed to 930100. System PIN is 0000 on delivery. 1. Access Net. Provider according to description on previous page. 2. Scroll to the required preselection. Press OK. 3.
English During a call/On-line Menu 1. - Connect an external call. Press Menu. Scroll to desired service (e.g.): Insert Pause May be required when dialling via PBX exchange. Mute to enable/disable the microphone. Make 2nd Call Dial a second number, e.g. to use in a conference or three-way call (=R). - Ringback When the number is free you will hear a quick ring signal (=5 ). - Phonebook To search the phonebook. - INT Call Call another handset (+1...). - Tone Temporary change to tone dialling.
English Specific absorption rate (SAR) This device meets approved international safety requirements for exposure to radio waves. This telephone measures 0,01 W/kg (measured over 10g tissue). The max. limit according to WHO is 2W/kg (measured over 10g tissue). Declaration of conformity Doro hereby declares that the Doro MoveEasy 316 conforms to the essential requirements and other relevant regulations contained in the Directives 1999/5/ EC and 2002/95/EC.
Troubleshooting English Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment that may be connected, e.g. extension cords and other phones. If the problem is resolved, the fault is with the other equipment. Test the equipment on a known working line (e.g. at a neighbour’s). If the product works then the fault is with your telephone line. Please inform your local telephone company.
English followed the instructions carefully. As an alternative you can visit our web site for FAQ’s or send an e-mail for a prompt reply. Electro Magnetic Radiation (EMR) This telephone complies with applicable safety requirements for exposure to radio waves. The mean power of this telephone is not greater than 14 mW. This is below the 20mW limit at which testing is required. Guarantee This product is guaranteed for a period of 12 months from the date of purchase.
English REN (RN for New Zealand) The REN (Ringer Equivalence Number) or (RN) is of significance only if you wish to connect more than 1 telephone to your telephone line. A standard telephone line has a maximum REN capacity of 3 (RN of 5). It is possible to connect 3 devices with a REN of 1 (RN of 1) with no degradation to the product’s performance. Exceeding this limit may cause the volume of the ringer in any phone to decrease or not ring at all.
English 19
English Version 3.
