PhoneEasy 331ph
1 5 2 3 4 English 1 2 3 Ringer indicator Redial function Volume control 4 5 Flash button/programming Speed dial memories
English Operation Making a call Regular dialling 1. Pick up the handset. 2. Enter the desired number. Redial function If a number was engaged or if you wish to redial the most recently entered number, pick up the handset and press the redial button . Memories This telephone has 3 speed dial memories. Once a number has been saved in a memory location, you only need to press one button to make the call.
English Settings Connection 1. Connect the telephone cord to a network wall socket and to the T socket on the back of the telephone. 2. Connect the curly cord to the handset and to the socket marked q on the side of the telephone. 3. You will hear a click when the modular plug is correctly in place. 4. Set correct Flash button time to 100 (see Technical Information). 5. Lift the handset and listen for the dial tone. Ring signal The ringer volume can be adjusted using .
English Technical Information There are several switches on the base of the telephone. These switches set technical parameters. Flash button time (100/300/600) 100 is the standard setting for most countries. 300 for France/Portugal. 600 for New Zealand. Troubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment, extension cords and other phones. If the problem is resolved, the fault is with some other equipment.
English UK If you cannot resolve the fault using the faultfinder section, technical support is available by email on tech@doro-uk.com or via a premium rate telephone number: 0905 895 0854, calls cost 50 pence per minute (prices correct at the time of publication). Further contact details are available on our website: www.doro-uk.
English Version 1.
