PhoneEasy record 327cr
19 18 1 17 16 15 14 2 13 3 4 12 5 11 6 7 8 9 10 English 1 Ring signal indicator 2 Socket for handset cord 3 Handset volume control 4 Flash button/programming 5 Redial 6 Volume control, answer machine 7 Display 8 Answering machine ON/OFF 9 Delete message 10 11 12 13 14 15 16 17 18 19 Playback/Pause Repeat and record OGM Next Message Switch, number of ring signals Flash button switch Ring signal switch Speed dial R /P switch Socket for power supply Telephone cord socket
English Operation Making a call Ordinary dialling 1. Pick up the handset. 2. Enter the desired number. Redial If a number was engaged or if you wish to redial the most recently entered number, pick up the handset and press the redial button . Memories This telephone has 3 speed dial memories. Once a number has been saved in a memory location, you only need to press one button to make the call.
English Operation of Answer Machine The answer machine must be switched on in order to be able to receive messages. Turn the answer machine on/off by pressing ! under the cover. -- is shown if the answer machine is switched off, otherwise the number of messages is shown. In the ON position, incoming calls will be answered by the answer machine if you miss a call, and in the OFF position no calls will be answered.
English Delete messages If you want to delete a single message, press C during playback. Deletion of all messages simultaneously is only possible after playback: Press and hold C until you hear a long beep. Please note that new messages cannot be deleted until they have been played. Screening Incoming messages will be heard from the machine’s loudspeaker as they are received. If there is no sound adjust the volume with +/-. You can also lift the receiver and speak directly to the caller.
English Remote accessing 1. Call the answer machine. 2. Enter the remote code while the outgoing message is being played. If the code is correct you will hear two short beeps. 3. Select a remote access command (within 10 seconds), see below. Command Function 25..............................Play new messages 2#..............................Play all messages During playback 3#..............................Erase single message during playback 6#..............................Skip to previous message 7#.
English Voice control The answer machine will record the message as long as the caller keeps speaking (max. 120 seconds). When the caller stops speaking, the answer machine will disconnect after a few seconds. Out of memory The total capacity of the answer machine’s memory is approximately 15 minutes including outgoing and incoming messages. This memory space is shared by the outgoing message and the regular incoming ones.
English Settings Connection 1. Connect the telephone cord to a network wall socket and to the 2. 3. 4. 5. 6. T socket on the back of the telephone. Connect the mains adapter to the mains power socket and to the Y socket on the back of the telephone. Connect the spiral cord to the handset and to the q socket on the telephone’s left side. You will hear a click when the modular plug is correctly in place. Set correct Flash time to 100 (see Technical Information).
English Answer Machine Settings Outgoing message The outgoing message is your message that plays when there is an incoming call. The message could for example tell the caller that he or she may start talking after the beep, which will be heard following your outgoing message. An example of an outgoing message: -“Hello and welcome to the Andersons. We can’t get to the phone right now, but please leave a message at the sound of the beep, and we’ll return your call as soon as possible. Thanks for calling.
English Technical Information On the right side of the telephone there is a switch for Flash time. Flash time (100/300/600). 100 is the standard setting for most countries including the UK. Troubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment, extension cords and other phones. If the problem is resolved, the fault is with some other equipment. Test the equipment on a known working line (e.g. at a neighbour’s house).
English Declaration of conformity Doro hereby declares that the product Doro PhoneEasy record 327cr conforms to the essential requirements and other regulations contained in the directives 1999/5/EC (R&TTE), 2002/95/EC (ROHS). A copy of the manufacturer’s declaration is available at www.doro.com/dofc Guarantee This product is guaranteed for a period of 12 months from the date of purchase. In the unlikely event of a fault occurring during this period, please contact the place of purchase.
PhoneEasy record 327cr Remote access card Remote Code REMOTE ACCESS 1. Call the answer machine. 2. Enter the remote code when the outgoing message is played. 3. Select a remote access command (within 10 seconds), see list on reverse side. 4. If you listen to messages for longer than 2 minutes and 40 seconds, you will hear a tone. Press any button to continue. 5. Replace the handset. REMOTE ACTIVATION 1. Call the answer machine. It will answer after approximately 10 rings. 2. Enter your 3 digit remote code.
