Troubleshooting guide

English
12 www.doro.com
English
www.doro.com 13
Other
Recall Time (Australia and New Zealand only)
Access to additional network services such as “Call Waiting” can be gained
by using the recall button
R
. Example: when the call waiting tones are heard,
press
R
, listen for the dial tone, then press 2. Please note that some networks
require only the
R
button to be pressed, contact your network operator for more
services information.
If this product is connected to a business PBX system, press the recall button
R
followed by the extension number to transfer a call. The standard setting is 98
ms.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other telephones. If
the problem is resolved, the fault is with the other equipment.
Test the equipment on a known working line. If the product works, then the
fault is probably with the line. Please inform your local telephone company.
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller
Identication service from your network provider.
- If a text message is shown on the display, the call may be an international
call (no data received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone operates
in a PBX system.
If the telephone still does not work, contact Doro or the place of purchase.
Don’t forget the receipt or copy of the invoice will be required for guarantee
purposes.