Troubleshooting guide

English
4 www.doro.com
English
www.doro.com 5
Installation
Wall mounting
The telephone can be wall mounted by using the included wall mount bracket. It
can also be tted to a standard wall plate without using screws in Australia.
1. Secure two screws, vertically positioned 83 mm apart.
2. The screws should locate into the two keyholes on the back of the telephone.
3. Remove the hanging peg (located by the hook switch) by pushing it upwards.
4. Rotate the hanging peg 180 degrees, and then replace it.
The display
When the telephone is not in use the date and time, number of new and total
number of calls stored in the Caller ID memory will be shown in the display.
The display will illuminate during ringing, when accessing memory functions
and dialling out.
Ringer signal
The ringer can be adjusted using the switches located on the side of the
telephone:
e Ringer volume
n Ringer melody