Installation Guide

English
Position SMS
IMPORTANT!
You may need an Internet connection to use this service. Contact your
service provider for detailed subscription costs before activating.
The Doro Secure
®
580IUP can also be used as a GPS receiver. The cur-
rent location of the Doro Secure
®
580IUP user can be determined with
the help of the satellite controlled GPS (Global Positioning System) or
with the help of AGPS (Additional Global Positioning System). GPS signals
can only be received when there is clear view to the sky, the GPS signal
will not penetrate walls or other obstacles. GPS operation uses radio sig-
nals from satellites alone. AGPS additionally uses network resources to
locate and utilize the satellites in poor signal conditions.
Note! It can take 5 to 10 minutes for your location to be found the first
time you use the GPS. If your location isn't found, move to another
location.
This function sends a text message with the users position to the recipi-
ents saved in the number list when an assistance call occurs. The mes-
sage contains date, time, and the positioning information of the Doro
Secure
®
580IUP user. The message is not editable. If no position can be
found the message contains the latest known position. The positioning
message is sent after the editable assistance message, but before the
assistance call sequence starts.
Message example
• 2014.01.30T 10:00. Map link: http://www.maps.google.com/maps?
q=coordinates
Activate position SMS
1. Press and hold
.
2. Select Settings
Assistance Position SMS Activate.
3. Select On to enable, or Off to disable.
4. Press OK to confirm.
Set poll interval
1. Press and hold
.
2. Select Settings
Assistance Position SMS Poll interval:
23