Installation Guide

English
Insert the battery
Turn the phone on and off
1. Press and hold 1 to turn the phone on/off.
2. If the inserted SIM card is protected with an PIN code (Personal
Identification Number) PIN is displayed. Use the side buttons +/– to
enter the PIN code and press OK to confirm or delete with Clear (
upper right corner of keypad).
Tip: It is recommended to use Automatic SIM lock in order to ease
the use, see SIM lock (PIN code option), p.11.
Note! If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Tip: It is recommended to remove the protective plastic film from the
display to enhance the visibility.
Attempts: # shows the number of PIN attempts left. When no more at-
tempts remain, PIN blocked is displayed. The SIM card must then be un-
locked with the PUK code (Personal Unblocking Key).
1. Use the side buttons +/– to enter the PUK code and confirm with OK.
2. Use the side buttons +/– to enter a new PIN code and confirm with
OK.
3. Use the side buttons +/– to re-enter new PIN code and confirm with
OK.
Navigate the phone
Step-by-step instructions
• The arrow (
) indicates next action in step-by-step instructions.
2