Operation Manual
5
English
Shared phone book
The phone book in the base unit is shared by all handsets and has 10 entries which only
need to be stored once however many handsets there are. Useful telephone numbers are
pre-programmed in certain models.
Howeverthesenumbersmaynotmatchwithcalleridenticationforname/ringtone.
1. Press .
2. Scroll among the entries with
{
/
}
.
3. Press
O
to dial or scroll to the entry that is to be replaced. Press Option.
4. Scroll to Edit entry. Press OK.
5. Enter name. Press
}
.
6. Enter the telephone number, including the area code. Press OK.
Incoming numbers/Caller ID
The display shows you who is calling and the 30 most recent incoming numbers. New calls
are indicated by in standby mode.
If one and the same number calls in more than once it will be saved as only one entry.
Please note!
This function requires a subscription from your service provider.
Retrieving and dialling
1. Press
}
. Scroll to the required entry using
{
/
}
.
2. Press
O
to make a call or press Option for misc. choices.
Caller identication messages
Unavailable No information received, e.g. an international call.
Withheld Number cannot be shown.
Caller ID settings
1. Press
}
. Press Option.
2. Scroll to Settings. Press OK.
3 Scroll to required function, e.g. Category. Press OK.
4. Scroll to desired setting using
8
/
9
. Press OK.
Category Select whether the telephone will store missed or all incoming calls.
New call alert You can activate a tone that is heard when new numbers have been
received.