Troubleshooting guide

English
4 www.doro.com
English
www.doro.com 5
Operation
About the Answering Machine
The answering machine has to be turned on in order to receive messages. When
a call is received it will be answered after the selected number of rings (please
refer to page 5).
When the answering machine answers an incoming call, the caller will hear your
outgoing message. After a short beep they can then leave a message up to 300
seconds (user selectable 60/300 seconds). Should the caller exceed this limit the
call will be disconnected.
The memory will store approximately 40 minutes of incoming messages
(including the outgoing message).
Day/Time Stamp
The answering machine will announce the day of the week and the time when
each message was recorded.
Setting the Day/Time Stamp
1. Press and hold
9 9
, a beep will be heard. Do NOT release the
9 9
button.
2. Press
8 8
repeatedly until the correct day of the week is announced.
3. Press a repeatedly until the correct hour is announced.
4. Press
9
repeatedly until the correct minute/s are announced.
5. Upon completion release the
9 9
button.
6. The selected settings will now be announced.
Checking Current Day/Time
Press 9 9. To hear the current settings, e.g.: Thursday, ve fty PM.