X30 Telephone User Guide
DORO Audioline Ltd.
DORO X30 Introduction Thank you for purchasing this telephone. The DORO X30 is one of a new series of especially designed, high quality telephones. A number of user friendly features are available which include LCD, clock, call timer, thirteen memories, adjustable ringer, last number redial and mute. CONTENTS Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LOCATION OF CONTROLS 1 2 3 4 5 6 7 8 9 2 Handset Mute Volume control up/down LCD display Clock set Ringer volume control Ringer pitch control Recall Handset curly cord 10 11 12 13 14 15 16 17 Handset retainer Follow on call M1/M2/M3 direct memories Memory programming Memory dialling Call timer/reset button Keypad 0-9, *, # Last number redial
INSTALLATION Three 1.5V AAA batteries (supplied) are required to power the display and the clock. When the batteries are low this symbol will appear on the display. It is recommended that you change the batteries as soon as the symbol appears. 1. Remove the screw from the battery compartment cover on the base of the telephone. 2. Insert the batteries, observing correct polarity. 3. Replace the battery compartment cover and screw. 4.
TELEPHONE RINGER & PITCH CONTROLS The telephone ringer and pitch can be set to individual preferences, using the switches on the rear of the telephone. The ringer is denoted by a bell symbol and can be set to either high, low or off where off is represented by this symbol .. The ringer pitch also can be set to one of three different levels which are represented by a note symbol.
TO SET THE CLOCK 1. Press and release the button. 2. Use the or button. buttons to select the correct hour, then press and release the 3. Use the or button. buttons to select the correct minutes, then press and release the 4. Use the or and release the 5. Use the release the or buttons to select the correct day/date of the month, then press button. buttons to select the correct month of the year, then press and button. Note: The time/day setting may need resetting after replacing the batteries.
MEMORY USAGE Thirteen of your most frequently used telephone numbers can be stored in the memory three at one touch access (M1/M2/M3 buttons) and ten at two touch access (keypad digits 0-9). M1/M2/M3 BUTTONS - STORING 1. Press and release the button (the display will show StorE). 2. Enter the telephone number you wish to store. 3. Press the appropriate M1/M2/M3 button (the display will show StorE). 4.
HANDSET VOLUME CONTROL The volume of the handset earpiece can be increased or decreased in six different levels according to personal preference. To increase, press and release the button To decrease, press and release the button ADDITIONAL NETWORK SERVICES Optional Network services such as call waiting, reminder calls, charge advice, etc., can be accessed via the Recall (R) button. For further information, contact your Network Operator.
FAULT FINDING In the unlikely event of a fault occurring, proceed as follows: 1. Check that telephone is plugged into telephone socket and that all connections are secure. 2. Check telephone operation in master telephone socket. There may be a fault with the line in which case contact your Network Operator. 3. Check that total of REN numbers (see page 7) does not exceed 4. 4. If memory numbers are not dialled correctly, re-programme numbers and re-try. 5.
