User guide

3
INSTALLATION
Three 1.5V AAA batteries (supplied) are required to power the display and the clock.
When the batteries are low this symbol will appear on the display. It is recommended
that you change the batteries as soon as the symbol appears.
1. Remove the screw from the battery compartment cover on the base of the
telephone.
2. Insert the batteries, observing correct polarity.
3. Replace the battery compartment cover and screw.
4. Plug the telephone line cord and the handset curly cord into their respective sockets
on the base of the telephone.
5. Press both cords into their respective cable channels.
6. Plug the telephone line cord into a telephone socket.
Battery compartment Line cord Handset cord
Do not install in damp or high humidity locations such as bathrooms or garages.
Do not use near water or with wet hands.
Do not install in direct sunlight and disconnect from the line during a thunderstorm.
Note: Always disconnect the telephone from the telephone line when replacing batteries.
If replacement batteries are not inserted within 90 seconds, any stored memories will be
lost.