Operating Instructions

format, it is not a malfunction of the system.

 There are numerous USB and SD device producers and their products vary in solution and

format. We therefore cannot guarantee that this unit will support all USB and SD devices from

every brand.

 This system supports SD cards up to 8GB.

 MP3 / WMA track format requirements:

 MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32 kbps ~ 320 kbps.

Programming tracks for playback

Up to 64 tracks can be programmed for MP3 / WMA file playback in any order. Before

programming, however, be sure the system is in STOP mode.

1. Set the function selector to CD/ USB/SD mode, then press the stop button.

2. Press the program PROG button, MEM will be flashing on the LC display, and it will indicate

the program number and digits for the track number to be programmed.

3. Press the SKIP UP or SKIP DOWN button to select a desired track.

4. Press the program PROG button to store the track into the memory.

5. Repeat steps 3 and 4 to enter additional tracks into the memory.

6. When all desired tracks have been programmed, press the PLAY/PAUSE

button to play

the tracks in the assigned order.

7. To cancel programming, press the STOP button twice..

Copying of MP3 / WMA files

The system allows you to copy files from USB to SD/MMC or vice versa. You can copy a single

file/track, a folder of files/tracks, or all files/tracks on the storage medium.

Copying a single file/track

1. Insert a USB storage device and SD/MMC card, then select USB/SD mode (as described

previously).

2. Press the record

REC button during playback of the track you want to copy: “ONE” will be

flashing on the display. Press the record

REC button again to confirm.

3. The USB or SD icon will be flashing on the display while the system is copying the file.

4. Once the file has been copied, the unit will stop playback automatically. “END” will be shown on