Operating Instructions

The auxiliary input

Listening to a CD (or other auxiliary input)

1. Turn the volume knob clockwise to turn the equipment on.

2. Use the function selector to select TAPE/AUX mode, then connect the external audio device

(such as a CD player) to the AUX IN socket at the front of the equipment. The audio signal from

the external audio device will now be played through the system.

3. If an external audio device is connected to the AUX IN socket, playing of the auxiliary device takes

priority over cassette playback.

NOTE:

If you won't use the unit for a long time ,you had better take the CD out from the disk tray door .

Bluetooth Operation

1, Turn the volume knob clockwise to turn on the equipment on.

2, Set the function selector to select TAPE button.

3, Press the MODE button on the front panel once to Bluetooth mode,and the LCD will show “BT” all

the time.

4, Turn on your bluetooth device and scan , “Pyle Turntable” will be found on your bluetooth device.

Paired and connect the unit and your bluetooth device.

5, Play your bluetooth device as normally do, and the music will be played from the unit.

NOTE:

1, Make sure your bluetooth device and the unit is within 10 meters.

2, Check and see if there are other bluetooth devices nearby interfering the signal and connection.

AUX IN encoding

1. Use the function selector to select TAPE/AUX mode and then insert a memory device (USB drive,

SD or MMC card).

2. Press the record

REC button, it will take 3 - 4 seconds to read the memory device, then the

USB or SD icon will be flashing on the LC display.

3. Press the skip up

or skip down button to select the desired mode (USB or SD) for

encoding, then press the record

REC button again to confirm.

(You can skip this step if only a USB drive or an SD/MMC card is inserted.)