Operating Instructions

17
4. The system will start the encoding mode after a few seconds. During encoding, the USB or SD
icon will be flashing on the display.
5. To finish encoding, press the stop
button. The display will show “END” and return to
TAPE/AUX mode.
NOTE:The recording speed is 1:1. Recording will take as long as playing the CD (or other auxiliary
input).
 The recording format is preset at MP3 bit rate 128 kbps.
Troubleshooting Guide
If you are experiencing problems with your USB Turntable with Cassette Deck and Radio, check in the
section below whether there are any quick and easy checks you can do that may help you solve the
problem. If you cannot solve the problem by yourself, contact our after sales support line for advice. Do not
attempt to open, repair or modify the equipment yourself.
Problems with sound
 Clockwise rotate the power/volume knob to increase the volume.
 Make sure the unit’s power cord is connected to an appropriate electrical outlet.
 Make sure the wall socket is switched on.
 Make sure the function switch is set to your desired function: PHONO, USB/SD, TUNER,
TAPE/AUX, Bluetooth.
 When playing records, make sure you have selected the correct speed (33, 45 or 78 rpm).
 When playing a cassette, make sure it is properly inserted.
 When playing a CD ,make sure the CD is dealt face up .
 When playing a CD via the AUX IN connection, make sure the cable is firmly connected, all controls on
the CD player are properly set, the disc tray is closed and the disc is clean and undamaged.
 When playing music from a USB device (or SD/MMC card), make sure the memory device is properly
inserted in the USB port (SD/MMC card slot) and the correct MODE is selected.
Problems with radio reception
 Make sure you are in an area that can receive signals for your selected radio station.
 If AM reception is weak, rotate or reposition the equipment to improve reception.