Operating Instructions

6. Lower the tone arm to start playback of the record. During encoding, the USB or SD icon will be

flashing on the display.

7. To finish encoding, press the stop

button. The display will show “END” and return to PHONO

mode.

NOTE:

 The recording speed is 1:1. Recording will take as long as playing the record.

 The recording format is preset at MP3 bit rate 128 kbps.

Cassette Operation

1. Turn the volume knob clockwise to turn the equipment on.

2. Use the function selector to select TAPE/AUX /BT mode.

3. Insert a cassette with the tape facing away from you, as illustrated on the right. The

EJECT/FAST FORWARD button will pop out and the system will start playing the tape

automatically.

4. Turn the volume knob to your desired level.

5. To fast forward the cassette tape, press the EJECT/FAST FORWARD button halfway

down while the cassette is playing. The tape will be advanced forward rapidly.

6. To resume normal playback, slightly press the EJECT/FAST FORWARD button again.

The button will fully pop out again.

7. To stop playback, press the EJECT/FAST FORWARD button completely. Playback will

8. be stopped and the cassette tape will be ejected.

IMPORTANT!

When using the cassette deck:

 Make sure to insert the cassette in the correct direction.

 To avoid damaging the cassette, we strongly recommend taking it out of the

equipment after playing the cassette.

Cassette encoding

1. Set the function button to TAPE/AUX mode and then insert a memory device (USB drive, SD

or MMC card).

2. Press the record

REC button, it will take 3 - 4 second to read the memory device, then the