User manual

1312
Introduction
TC-1 is an ergonomiclaly designed & compact thermal imaging camera,
which is an ideal tool for Quality Control, Plant Maintenance and
premature fault detection. The non contact measurement principle
enables the safe investigation of rotating or electrical devices.
The correct measurement proceedure must be adhered to in order
that the optimum measurement results are obtained.
Safety instructions
- Check if the contents of the package are undamaged and
complete.
- Use the device only for purposes for which it is intended.
- The instrument is not a toy. It must be kept out of the hands of
children.
- Store the device in a dry place.
- Do not drop the instrument! Protect the instrument against shock
or vibrations. Note the storage conditions.
- For cleaning the instrument please do not use an abrasive
cleaner only a dry or wet piece of soft cloth. Do not allow any
liquid into the interior of the device.
- Do not use the device when the instrument or a part of the
instrument is damaged. In case of a defective devise please
contact your distributor.
Delivery contents
- TC-1 Infrared camera
- USB cable
- 4 x AA-1.5 volt battery
- Micro-SD card
- Instruction for Use
Description of the unit
◄
10
◄
9
1
◄
6
◄
7
◄
8
◄
◄
11
◄
12
◄
13
◄
14
4
◄
3
◄
2
◄
◄
15
17
◄
16
◄
5
◄
1. Date and time
2. The cursors (white) indicate
the highest temperatures in the
thermal image.
3. The cursor (cross) shows the
temperature of the object located
in the middle of the screen.
4. LCD
5. Emissivity display
6. Color Palette Key
7. Mode Key
8. Down Key
9. Battery Cover
10. Trigger
11. Unit Key °C/°F/K
12. Up Key
13. Micro SD and Mini USB
14. Infrared Lens
15. The cursors (pink) indicate the
lowest temperatures in the
thermal imager.
16. Temperature indication
17. Low battery symbol
Operating the unit
Features
- Detector „Made in Germany“ - Adjustable emissivity
- Large color display: 40x50mm - Audible and visual
- Temperature range -20°C...+250°C Hi-Lo-alarms (HI/LO)