User manual

1716
Battery changing / Battery-status
The thermometer incorporates visual low battery indication as
follows:
Battery OK: measurements are possible
Battery low: battery needs to be replaced,
measurements are still possible
Battery Exhausted: measurements are not possible
When the ‘Low Battery’ icon indicates the battery is low, the battery
should be replaced immediately with AA, 1.5V batteries.
Please note: It is important to turn the instrument off be
fore replacing the battery otherwise the thermometer may
malfunction. Dispose of used battery promptly and keep
away from children.
Set up
Push Mode button (7) for entering the Menu. Press Up Key (12) or
Down Key (8) to select the setup you want to change. Press the
trigger(10) for entering the submenu. Press Mode Key (7) again to
return to the measurement screen.
E: The default emissivity is 0.95, or select other default
emissivity: Blackbody: 1.0, Matt: 0.95, Semi-matt: 0.8,
Semi-glossy: 0.6, Glossy: 0.3
Select Set value to adjust the emissivity (0.1 to 1 step .01).
HAL: You can select HA temp or LA temp to adjust the High Alarm
(HAL) or Lo Alarm (LAL) limits (step .1).
LAL:
Power off: The default setting is “ Auto off 1 min”, you can select other
default value: 5, 10, 20 minutes or “ No auto off ”.
Manually power off the device by pressing Mode Key (7) for
3 seconds.
Backlight: Selectable 3 levels of brightness.
Set time: Set the date and time in MM/DD/YYYY (month/day/year) and
HH/MM/SS (hour/minute/second) formats.
Time stamp: Turn on Time stamp to save thermal images with real-time
stamp.
Turn off Time stamp to hide date and time on stored thermal
images.
Erase le: Select All picture! to clear all stored thermal images.
Select All movie! to clear all stored videos.
Save mode: Select Picture to save thermal images in image mode.
Select Movie to save thermal images in video mode.
Noise lter: Turn on Filter to reduce noise in an image.
Turn off Filter to display real image noise.