DNR V SERIES DISPLAY 25 inch 160 FIRST STREET S.E. ST. PAUL, MN 55112-7894 PHONE 651-633-1742 FAX: 651-633-1065 www.dotronix.com User’s Manual Publication No.
PRECAUTIONS This monitor contains circuits and components designed to meet specific performance and safety requirements. No component changes may be made without the written permission of the manufacturer. Dotronix Limited Warranty Dotronix warrants that for one (1) year from date original purchase, it will, at its option, repair, replace or refund the purchase price of any product which it manufactured that proves defective in material or workmanship in normal use and service.
INDEX AVAILABLE MENUS ............................................................................. 16 BASIC MENU OPERATION .................................................................. 16 CRT COATINGS OPTION ..................................................................... 13 GETTING STARTED ............................................................................... 8 IMPORTANT SAFETY INSTRUCTIONS ................................................. 3 INTRODUCTION ................................
SAFETY WARNINGS 2. Follow Instructions Follow all operating and use instructions. 3. Retain Instructions Keep the safety and operating instructions for future reference. 4. Heed Warnings Follow all warnings on the product and in the operating instructions. 5. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6.
35 RF AGC: (Rf Automatic Gain Control) Range is from 0- 63. 48 is a general setting. Tune in weakest available channel and adjust for a snow-free picture. 36 HORZ AFC: Range is 0-1. Set to 0. O=AFC2 Normal. 1=AFC2 X 3. 37 WHITE COMPRESS: (White Compression) The range is 0 to 1. Set to 0. 0 = Enable and 1 = Disable. 38 60HZ SW: (60 Hertz Switched) The range is 0 to 2. 39 PIF VCO: ( PIF Voltage Controlled Oscillator ) . Range is 0-127. 40 RED CUT: B&W tracking adjustment. Range is 0-254. Typical value is 20.
SAFETY WARNINGS antenna system, take extreme care to keep from touching such power lines or circuits, as contact with them might be fatal. 17. Overloading Do not overload wall outlets and extension cords, as this can result in risk of fire or electric shock. 18. Objects and Liquid Entry Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
03 POWER MANAGE: Range is 0-7. 1-7 is the length of time (in hours) that the set will continue to operate if unattended. When the set nears turn off time, an on-screen message appears telling you to press any key to continue normal viewing. When set to 0, this feature is inactive. 04 VERT POS: Moves On-Screen Displays vertically. The Range is from 0-25. This adjustment is generally set at 5. 05 HORZ POS: Moves On-Screen Displays horizontally. Range is from 1-15. Generally set at 9.
INTRODUCTION Congratulations on your purchase of a new DNR V Series 25 inch Display. This manual has been prepared to act as a guide in the operation of your monitor. Please read the following operating instructions carefully before using your monitor so that you are familiar with all of its features and capabilities. All precautions and safety warnings should be read and strictly observed.
SPECIFICATIONS AVAILABLE MENUS Your monitor is menu operated. In other words, adjustments to the monitor are made via a list of choices which appear on your monitor screen. To view these menus, press the MENU key on the remote control. Press MENU repeatedly to toggle through the available menus. • • • • • • • Horizontal Scan Rate: 15.
MECHANICAL DIMENSIONS-CUBE REMOTE CONTROL Screen A D C The following has been prepared to act as a guide in the operation of your REMOTE CONTROL input equipped monitors. Please read the following operating instructions carefully so that you are familiar with all of its features and capabilities before using your service module. All precautions and safety warnings should be read and strictly observed. Screen Screen Hgt.
REAR CONTROLS DNR25 SERVICE MODULE INPUT W/ REMOTE CONTROL Service Module input is in the front lower right bottom of bezel. FOCUS SCREEN On Off IR Enable Switch Power Switch * No internal speakers provided. Note: Manual power switch is inactive with HARC option installed. CUSTOMER MENU BRIGHTNESS Adjusts the brightness level of black areas in the picture. CONTRAST Adjusts the overall contrast and color level of the picture. COLOR Adjusts the intensity of the colors in the picture.
WALL INSTALLATIONS CRT COATINGS OPTION Cooling: Convection cooling will be adequate for most installations. Internal cabinet temperature must not exceed 55o(131oF). Stackability: Each monitor is enclosed in a heavy duty industrial metal cabinet. Maximum recommended stack size is six units by six units without additional support. As an option a factory installed anti-glare coating may have been applied to the CRT surface of your monitor.
