User`s manual
9
SPECIFICATIONS
• Horizontal Scan Rate: 15.75 kHz ± 500 Hz
• Vertical Sweep Rate: 60 Hz ± 5%
• Video Bandwidth: 6 MHz (-3db)
• CRT Size: 25-inch
• Resolution: 500 + lines
• NTSC Video input through 75 ohm RCA connector
• RF-NTSC connector type F
• Front Controls 25: Brightness
w/Remote Control/ Contrast
Service Module Color
Sharpness
Tint
Picture Preference
• Rear Controls: Focus, Screen
• Power requirements: 120 VAC ± 10%, 60 Hz
• Power consumption: 100 W nominal
• Operating Temperature: 0
O
C to +45
O
C
(+32
O
F to +113
O
F)
• Storage Temperature: (-17
O
C to +70
O
C)
(0
O
F to +158
O
F)
• Cooling: Convection cooling will be adequate for most installa
tions. Internal cabinet temperature
must not
exceed 55
o
C
(131
o
F).
• Stackability: Maximum recommended size is six units by six
units without additional support.
• Agency Approvals: UL, CUL, FCC Class A
16
BASIC MENU OPERATION
The remote control buttons which are most frequently used for menu opera-
tions are shown here. In addition to these buttons, the number buttons may
also be used where a number value is necessary, such as setting the time on
the monitor.
Set Up Menu Function
Auto Program Finds and stores active channels with the CHANNEL Up/Down
arrows.
Add/Del/Blnk Creates a list of favorite channels to use with CHANNEL Up/
Down arrows.
Channel Labels Assigns a network/station label, or call letters to channels.
(Example: If you assign ABC to channel 13, then ABC will
appear when you select channel 13.
Clock Set Sets the monitor's clock to the current time.
Caption/Text Displays closed captions or text when available on the
selected channel. Options are Off, Caption 1, Caption 2,
Caption 3, Caption 4, Text 1, Text 2, Text 3, and Text 4.
Language Displays a choice of three different languages, English,
Spanish or French.
Auto Program Contrast Bass
Add/Del/Blnk Brightness Treble
Ch. Labels Color Balance
Clock Set Tint Audio Mode
Caption/Text Sharpness Front Surr
Language Picture Pref Soundrite
Audio Pref
Setup Video Audio
Menu Menu Menu
AVAILABLE MENUS
Your monitor is menu operated. In other words, adjustments to the
monitor are made via a list of choices which appear on your monitor
screen. To view these menus, press the MENU key on the remote control.
Press MENU repeatedly to toggle through the available menus.
* No internal speakers supplied.