DISPLAY USER GUIDE Quick Start 1 Set up your exerspy armband using the Start Here card that was included with your exerspy armband purchase. 2 Slide the armband onto your left arm and wait for it to power on, which may take up to 10 minutes. After the armband powers on, hold the mode and view button on the display until “Hello” is displayed. 3 Holding the exerspy display next to the armband, press and quickly release the status button on the armband to synchronize the devices.
Table of Contents Package Includes .......................................................03 How to Use Your Display ..........................................04 Important Information About the Display................10 Accuracy.....................................................................14 Manufacturer’s Declarations ....................................15 Regulatory Statement ................................................19 Copyright, Patent and Trademark Notices................
Package Includes A B C The exerspyTM display package includes one of each item pictured above: A. exerspyTM display - part number 100400 B. exerspyTM display clip - part number 100398 C. exerspyTM display watchband - part number 100401 The exerspy display is an accessory to the exerspy armband. The exerspy activity and calorie tracking system works with the dotFIT Me online nutrition and fitness program.
How to Use Your Display Important: The Armband armband must must be be personalized personalized before before the the display Display will function properly. Refer to the Armband exerspy armband Quick Start Here! Start! for instructions. card. Display Overview ® display (the “Display”) is a convenient The BodyMedia exerspy display (the “display”) is a convenient way for you to see up-to-the-minute information about your calories burned, steps taken, and physical activity duration (PAD).
kJ 837 2,092 8,368 10,460 AC T I V l I TY Y T E CA L II M OR PSS STE S T Y Y ES Y GE STERR DAY TA RR S PS SST E S ACT IV l I T YY T E LO IM R IE s t mo e re h ig d t Y w vie CALORIES Mode The CALORIES mode displays your energy expenditure values for the selected view (TODAY, YESTERDAY, or TRIP). The calorie value includes an estimate for periods when you did not wear the Armband. armband.
How to Use Your Display (continued) IE S PS SST E S ACTIV l II T YY T E CA LO IM R mo AC T I V l ITYY T CA L E IP TR T IP TR YYE E Y SS T ER R DAY T ARG T Ligh The of t but you or n TR IIP l ITY Y TRI The bur spe odo TRI 3 se cur Not If d min mo Dis Dis T RR IIP w vi e YY s E IM OR SS ACTIVV CA L IE PS SST E re t mo e T et Y SS T ER R GE R DAY TAR h ig d Y YE DA TO 65 s IM YY w vi e YESTERDAY View The YESTERDAY view shows the total number of calories
CA L IP S PS SS T EE S AC TIVV s l IT YY T LO CA E IP TR T Y GE ST E RR DAY TAR s et YYE re T LO CA IP TR Y TR IPIP mo l IT Y Y YYE T Y GE SST EERR DAY TAR s et TR IP ACT I VV E w vi e User UserGuide Guide S PS SSTE IM R SS IE DA TO play e ht ig Not in Sync If data is not received from the armband Armband for for 55 minutes, the display Display will will assume assume aa “NOT “NOT IN IN SYNC” SYNC” mode and revert to TIME mode.
How to Use Your Display (continued) Using the display clip The clip allows you to attach the display firmly to thin material. Note: Never slide thick materials into the clip opening as it may strain and damage the clip. 1. To attach the clip to a desired area, gently lift the clip lever to open the clip mouth. 2. Slide the material you wish to attach to the clip between the upper and lower portions of the clip mouth. Push the clip lever back down to tighten and secure the clip.
Care and Maintenance You care for and maintain the display, clip, and watchband in the same way. Always clean and dry if they become noticeably moist or dirty. Failure to keep them clean or improper cleaning may irritate the skin and cause deterioration of the casing. To clean, gently wipe all surfaces with a soft cloth or towel moistened with mild soap and water. Wipe with a clean damp cloth to remove any excess soap. Never clean with solvents.
Important Information About the Display Follow operating instructions CAUTION Non-Ionized radiation The Waste Electrical and Electrical Equipment Regulations indicates separate collection for electrical and electronic equipment Tested to applicable safety standards.
Cautions Always consult a physician before starting any new diet or exercise program. This system is not to be used for diagnostic purposes. This system is not intended as a substitute for the medical advice or supervision of your personal physician. CAUTION: This product is not defibrillation proof. CAUTION: Do not get the device close to other devices that can cause electromagnetic interferences of any nature.
Important Information About the Display (continued) CAUTION: Though the display was designed for wearability and long-term use, it is a sensitive monitoring device. Rough handling can break internal components. Never drop or shock the display and always store it in a safe place when not in use. CAUTION: Avoid exposing the display to extreme temperatures, direct sunlight, sand, or mechanical shock.
Accuracy System (Per day, adults) Information on the “Today View” of the display is within 5% of the values reported by the application for total calories, minutes of physical activity, and total step count.
Manufacturer’s Declarations Patient Environment Guidance and Manufacturer’s Declaration - Emissions The display is intended for use in the electromagnetic environment specified below. The customer or user of the display should ensure that it is used in such an environment.
Guidance and Manufacturer’s Declaration - Immunity The display is intended for use in the electromagnetic environment specified below. The customer or user of the display should ensure that it is used in such an environment. IEC 60601 Test Level Immunity Test Compliance Level Electromagnetic Environment - Guidance ESD IEC 61000-4-2 ±6kV Contact ±8kV Air ±6kV Contact ±8kV Air Floors should be wood, concrete, or ceramic tile. If floors are synthetic, the r/h should be at least 30%.
Manufacturer’s Declarations (continued) Guidance and Manufacturer’s Declaration - Emissions The display is intended for use in the electromagnetic environment specified below. The customer or user of the display should ensure that it is used in such an environment. Immunity Test IEC 60601 Test Level Conducted RF IEC 61000-4-6 3 Vrms 150 kHz to 80 MHz Radiated RF IEC 61000-4-3 3 V/m 80 MHz to 2.
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, and electromagnetic site survey should be considered.
Regulatory Statement FCC Declaration of Conformity – We, BodyMedia, Inc., 4 Smithfield Street, 11th Floor, Pittsburgh, PA 15222, phone: 412-288-9901, declare under our sole responsibility that the products, BodyMedia, Inc. and BodyMedia® Display Model DD100 complies with part 15 of the FCC rules.
CENELEC EN 60601-1-1 - Medical electrical equipment - Part 1: general requirements CAN/CSA-C22.2 No.606.1-M90 ETSI EN 301 489-1 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 1: Common Technical Requirements V1.3.1 ETSI EN 301 489-3 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Harmonized EN for ElectroMagnetic Compatibility (EMC) of Radio Comms. Equipment and Services.; Pt.
dotFIT, LLC 250 N. Westlake Blvd., Ste 220 Westlake Village, CA 91362 877.436.8348 www.dotFIT.