User guide

Using the display clip

The clip allows you to attach the display ﬁrmly to thin

material.

Note: Never slide thick materials into the clip opening

as it may strain and damage the clip.

1. To attach the clip to a desired area, gently lift the

clip lever to open the clip mouth.

2. Slide the material you wish to attach to the clip

between the upper and lower portions of the clip

mouth. Push the clip lever back down to tighten

and secure the clip.

Using the display watchband

The display comes with a watchband that allows you

to wear the display on your wrist.

1. Remove the display from the clip by twisting the

display counter clockwise and lifting up.

2. Place the display in the band cradle, with the

logo facing the nine o’clock position. Make sure

the display is ﬁrmly seated into the cradle evenly.

3. Twist the display into the watchband cradle

clockwise until the two lines along the side of the

display line up and it “locks” into position.

How to Use Your Display (continued)

exerspy display