Installation & Assembly

ASSEMBLY INSTRUCTIONS

Place 1 pair of SLIP SLEEVES (J) at the top of each

POLE. Please make sure the arrow faces up and

that the word “TOP” is right side up.

Lower LARGE SHELF (A) over the POLES so that

the corner cylinders of the LARGE SHELF (A) are

positioned over the SLIP SLEEVES (J).

*Use a rubber mallet, if needed, to secur

e the

SHELVES

(A+B+C).

STEP 7

A (1) J (12)

Hang the HANGING BRACKET (H) on both ends of the MEDIUM

SHELF (B) and the LARGE SHELF (A) as shown.

Fasten HANGING SCREW (H) through HANGING BRACKET (H) to

HANGING ROD (G). Do this for both HANGING RODS (G).

STEP 8

H (4)

G (2)