Cut Sheet

• Assembled*
• Includes Screw and
Threaded Strap
• Steel
• Zinc Plated
Three piece K.O. seals are used to seal up holes punched
in panels or knockouts from outlet boxes, They are held
in place by a screw inserted through the seal into a
threaded strap on the opposite side of the opening.
Available in sizes from 1/2" thru 6". 3 piece K.O. seals are
embossed to centralize in knockout. Installs from the
inside or outside of any box without disarranging wires.
One screw secures unit. Size is stamped into seal.
3 Piece K.O. Seals | PC 5450
D10S* 10240 1/2" 100 100 2.62# C
D20S* 10242 3/4" 50 50 1.73# C
D30S* 10244 1" 25 25 1.33# C
D40S 10246 1-1/4" 25 25 1.74# C
D50S 10248 1-1/2" 10 10 1.03# C
D60S 10250 2" 10 10 1.46# C
D70S 10252 2-1/2" 10 10 2.16# C
D80S 10254 3" 10 10 3.11# C
D90S 10256 3-1/2" 10 10 3.97# C
D100S 10258 4" 10 10 5.81# C
D110S 10260 4-1/2" 10 10 10.45# C
D120S 10262 5" 10 10 13.33# C
D130S 10264 6" 10 10 14.10# C
CAT NO UPC SIZE STD MSTR WT/STD UNIT
1210D 12100 1/2" 100 1000 0.45# C
1211D 12110 3/4" 100 1000 0.66# C
1212D 12120 1" 100 1000 0.99# C
1213D 12130 1-1/4" 50 500 0.70# C
1214D 12140 1-1/2" 25 250 0.46# C
1215D 12150 2" 25 250 0.93# C
1216D 12160 2-1/2" 25 250 1.20# C
• Snap In
• Steel
• Zinc Plated
Snap in K.O. seals are used to seal up
holes punched in panels or knockouts
from outlet boxes. They are held in
place by spring tension. Available in
sizes from 1/2" thru 2".
K.O. Seals | PC 5440
KO50 16000 1/2" 100 1000 1.44# C
KO75 16010 3/4" 100 1000 1.62# C
KO100 16020 1" 100 500 2.10# C
KO125 16030 1-1/4" 50 100 1.45# C
KO150 16040 1-1/2" 50 50 2.14# C
KO200 16050 2" 25 25 1.44# C
CAT NO UPC SIZE STD MSTR WT/STD UNIT
• 105° C
• Snap In
• Reusable
Nylon KO bushings are snapped into
punched holes in panels to protect
wires from the rough edges.
C9
FITTINGS & STAMPINGS
UPC Vendor ID Code: 78-1002
Nylon KO Bushings | PC 6100
See new products at www.lhdottie.com
CAT NO UPC SIZE STD MSTR WT/STD UNIT