Cut Sheet

To Order: Phone [phone] / Fax [phone]
B12
Hammer Drills (CD Series) made specifically for
Concrete Screw Anchoring System and are
manufactured with closer tolerances.
• Phillips or Hex Head
• Accommodates All Lengths
• Storage Box
36H114 11208 3/16 x 1-1/4" 1/4" 5/32 x 3-1/2" 100 500 0.89# C
36H134 11288 3/16 x 1-3/4" 1/4" 5/32 x 3-1/2" 100 500 1.07# C
36H214 11368 3/16 x 2-1/4" 1/4" 5/32 x 4-1/2" 100 500 1.30# C
36H234 11448 3/16 x 2-3/4" 1/4" 5/32 x 4-1/2" 100 500 1.51# C
36H314 11528 3/16 x 3-1/4" 1/4" 5/32 x 5-1/2" 100 500 1.87# C
14H114 25208 1/4 x 1-1/4" 5/16" 3/16 x 3-1/2" 100 500 1.44# C
14H134 25288 1/4 x 1-3/4" 5/16" 3/16 x 3-1/2" 100 500 1.83# C
14H214 25368 1/4 x 2-1/4" 5/16" 3/16 x 4-1/2" 100 500 2.26# C
14H234 25448 1/4 x 2-3/4" 5/16" 3/16 x 4-1/2" 100 500 2.96# C
14H314 25528 1/4 x 3-1/4" 5/16" 3/16 x 5-1/2" 100 500 3.02# C
14H334 25608 1/4 x 3-3/4" 5/16" 3/16 x 5-1/2" 100 500 3.41# C
14H400 25648 1/4 x 4" 5/16" 3/16 x 5-1/2" 100 500 3.62# C
36P114 11201 3/16 x 1-1/4" #2 5/32 x 3-1/2" 100 500 0.84# C
36P134 11281 3/16 x 1-3/4" #2 5/32 x 3-1/2" 100 500 1.04# C
36P214 11361 3/16 x 2-1/4" #2 5/32 x 4-1/2" 100 500 1.28# C
36P234 11441 3/16 x 2-3/4" #2 5/32 x 4-1/2" 100 500 1.45# C
36P314 11521 3/16 x 3-1/4" #2 5/32 x 5-1/2" 100 500 1.77# C
14P114 25201 1/4 x 1-1/4" #2 3/16 x 3-1/2" 100 500 1.39# C
14P134 25281 1/4 x 1-3/4" #2 3/16 x 3-1/2" 100 500 1.85# C
14P214 25361 1/4 x 2-1/4" #2 3/16 x 4-1/2" 100 500 2.05# C
14P234 25441 1/4 x 2-3/4" #2 3/16 x 4-1/2" 100 500 2.53# C
14P314 25521 1/4 x 3-1/4" #2 3/16 x 5-1/2" 100 500 2.96# C
14P334 25601 1/4 x 3-3/4" #2 3/16 x 5-1/2" 100 500 3.38# C
14P400 25641 1/4 x 4" #2 3/16 x 5-1/2" 100 500 3.61# C
Hex Head
Slotted
1/4"
ANCHOR HEX/PHILLIPS DRILL
CAT NO UPC SIZE BIT SIZE SIZE STD MSTR WT/STD UNIT
Flat Head
Phillips
3/16"
Flat Head
Phillips
1/4"
Hex Head
Slotted
3/16"
IT1000 14495 Installation Tool 111.50# Ea
CAT NO UPC DESCRIPTION STD MSTR WT/STD UNIT
CD5323 14500 3/16" 5/32 x 3-1/2" 10 10 0.22# Ea
CD5324 14502 3/16" 5/32 x 4-1/2" 10 10 0.22# Ea
CD5325 14504 3/16" 5/32 x 5-1/2" 10 10 0.24# Ea
CD3163 14506 1/4" 3/16 x 3-1/2" 10 10 0.25# Ea
CD3164 14508 1/4" 3/16 x 4-1/2" 10 10 0.27# Ea
CD3165 14510 1/4" 3/16 x 5-1/2" 10 10 0.29# Ea
5/32"
3/16"
SDS Rotohammer Bits See Page E4
CAT NO UPC ANCHOR SIZE DRILL SIZE STD MSTR WT/STD UNIT
C
oncrete Anchoring System
Hi-Low Thread - PC 4560
ANCHORS & KITS > CONCRETE ANCHORS
Installation tool installs all lengths of both phillips & hex head concrete
screws. Consists of one each: Masonry drill bit holder; Phillips socket
driver with one #2 & one #3 Phillips bit; 1/4" Hex socket driver; 5/16"
Hex socket driver & Allen wrench.
Faster to install than most steel anchors, yet has significant
load capacities. One tool drills the hole and sets the anchor
without the need to remove from the drill chuck. Has the
added advantage of close to edge fastening without potential
breakout. Works in poured concrete, prestressed concrete,
cinder block, brick, and mortar, and can be loosened for
adjustment or removed. ICC Approval (Pending).
Installation Tool - Phillips & Hex Head
PC 4590
Hammer Drill Carbide Tipped Masonry Drill Bits
PC 4570
• Concrete Anchor
System
• Hex Head Slotted or
Flat Head Phillips
• Hi-Low Thread
• Ceramic Coated
Blue Finish
• Includes Drill
• Caution! Always
Wear Eye Protection
• Carbide Tipped
• Close Tolerances
• Caution! Always
Wear Eye Protection