SDS

SafetyDataSheet(SDS)

Date Prepared/Revised: 1/6/2015 Version no.: 02 Supersedes: (9/11/2014)


1) Follow personal protective equipment recommendations found in section 8.
2) Maintain adequate ventilation.
SPILL CLEAN-UP PROCEDURES:
1.) Evacuate unprotected personnel from the area.
2.) Remove sources of ignition if safe to do so.
3.) Pickup spilled materials using non-sparking tools and place in an appropriate container for disposal.
4.) Contain spill to prevent material from entering sewage or ground water systems.
5.) Always dispose of waste materials in accordance with all EU, National and Local Regulations.
Handling:
Flammable Aerosol, use in a well ventilated area.
Do not use near sources of ignition.
Do not to eat, drink and smoke while working with this material.
Wash hands after use.
Conditions for safe storage, including any incompatibilities:
Store out of direct sunlight.
Storage Temperature: 32° to 120°F (0° to 49°C).
No known incompatibilities.
Appropriate engineering controls:
Ensure adequate ventilation. A system of local and/or general exhaust is recommended to keep
employee exposures below the Airborne Exposure Limits.
Keep away from sources of ignition.
Take precautionary measures against static discharge.
Personal Protection:
Eye & face protection devices such as safety glasses, safety goggles or face shield are recommended.
Skin protection
Wear the appropriate protective clothing, including boots, gloves, lab coat, apron or coveralls, as
appropriate, to prevent skin contact.
Respiratory protection:
Use only in an adequately ventilated area. For unknown vapor concentrations use a positive-pressure,
pressure-demand, self-contained breathing apparatus (SCBA).
Hazardous Ingredient CAS
Number
ACGIH TLV
(TWA)
ACGIH TLV
(STEL)
OSHA
PEL
(TWA)
OSHA PEL
(STEL)
7. Handling and Storage
8. Exposure Controls / Personal Protection