Cut Sheet

To Order: Phone [phone] / Fax [phone]
FITTINGS & STAMPINGS > ROOF JACKS > STEEL TIE WIRE > TIE WIRE DISPENSER
Standard - Roof Jacks
PC 5230
C8
RN3 10350 Pipe Sizes: 1/2", 3/4", 1" * 12 12 11.95# Ea
Base Size: 8-3/4", 12-1/2"
RN4 10352 Pipe Sizes: 1-1/2", 2", 2-1/2", 3" 12 12 18.82# Ea
Base Size: 10-3/4" x 12-1/2"
CAT NO UPC PIPE SIZE STD MSTR WT/STD UNIT
•Can be modified to fit 1-1/4” pipe Fits any roof pitch - from flat to 45° Tested for ultraviolet, ozone, and weather resistance.
RJ50 69600 1/2" 24 24 24.08# Ea
RJ75 69605 3/4" 24 24 23.92# Ea
RJ100 69610 1" 24 24 23.06# Ea
RJ125 69615 1-1/4" 24 24 23.13# Ea
RJ150 69620 1-1/2" 24 24 22.87# Ea
RJ200 69625 2" 24 24 21.82# Ea
RJ300 69630 3" 12 12 15.22# Ea
RJ400 69635 4" 12 12 19.39# Ea
CAT NO UPC SIZE STD MSTR WT/STD UNIT
Standard
• 24 Gauge
• Elastomer Collar
• 28 Gauge
• Galvanized Steel
Roof Jacks are applied to the roof to form a water-tight seal. They add additional
support between the roof line and service entrance conduit or ventilation pipe.
•161/2Gauge
• 400 Ft. (3 1/2#)
• Black Annealed or Galvanized
Tie wire is used for many purposes, among them tying down PVC
conduit in trenches before pouring concrete, as well as drop ceiling appli-
cations.
Black Annealed - PC 5030
TY164 28170 20 20 71.10# Ea
Galvanized - PC 5035
VTYG 28180 20 20 68.35# Ea
CAT NO UPC STD MSTR WT/STD UNIT
Roof Jacks are applied to the roof to form a water-tight seal. They add
additional support between the roof line and service entrance conduit or
ventilation pipe.
3 in 1 Roof Jacks
PC 5250
Steel / Galvanized - Tie Wire
PC 5030 - 5035
• High Impact Plastic
• Mounts On Tool Belt
TYD 28175 Tie Wire Dispenser 1 6 1.10# Ea
CAT NO UPC DESCRIPTION STD MSTR WT/STD UNIT
The tie wire dispenser stores and dispenses tie wire.
Tie W ire Dispenser
PC 5040