Cut Sheet

See new products at lhdottie.com
FASTENERS & HARDWARE > MACHINE SCREWS
Round head machine screws project above the material
surface. This head style is used when clearance is not an
important factor. Length is determined from the base of
the fastener head.
• Machine Screws
• Round Head
• Square/Slotted
• Zinc Plated Steel
• Invincibox
™
Up To 2"
Round Head Square/Slotted Machine Screws
Zinc Plated - PC 4020
A3
TMC63212 11646 6-32 x 1/2 100 500 4000 0.20# C
TMC63234 11647 6-32 x 3/4 100 500 4000 0.26# C
TMC6321 11648 6-32 x 1 100 500 4000 0.37# C
TMC632114 11649 6-32 x 1-1/4 100 500 4000 0.40# C
TMC632112 11650 6-32 x 1-1/2 100 500 4000 0.49# C
TMC6322 11651 6-32 x 2 100 500 3000 0.68# C
TMC6323 81479 6-32 x 3 100 1000 0.96# C
TMC6324 81480 6-32 x 4 100 1000 1.23# C
CAT NO UPC SIZE STD SLEEVE MSTR WT/STD UNIT
CAT NO UPC SIZE STD SLEEVE MSTR WT/STD UNIT
10-24
10-32
1/4-20
• Machine Screws
• Truss Head
• Slotted/Phillips
• Zinc Plated Steel
• Invincibox
™
Up To 2"
Truss Head Machine Screws are needed when installing
wiring devices behind wall plates. The perfect screw
when a low profile fastener is needed.
6-32
RMDS63238 65480 6-32 x 3/8 100 500 4000 0.19# C
RMDS63212 65484 6-32 x 1/2 100 500 4000 0.26# C
RMDS63234 65488 6-32 x 3/4 100 500 4000 0.26# C
RMDS6321 65492 6-32 x 1 100 500 4000 0.33# C
RMDS632114 65496 6-32 x 1-1/4 100 500 4000 0.40# C
RMDS632112 65501 6-32 x 1-1/2 100 500 4000 0.49# C
RMDS6322 65505 6-32 x 2 100 500 3000 0.62# C
RMDS83238 65512 8-32 x 3/8 100 500 4000 0.23# C
RMDS83212 65511 8-32 x 1/2 100 500 4000 0.29# C
RMDS83234 65515 8-32 x 3/4 100 500 4000 0.40# C
RMDS8321 65519 8-32 x 1 100 500 4000 0.50# C
RMDS832114 65523 8-32 x 1-1/4 100 500 4000 0.72# C
RMDS832112 65430 8-32 x 1-1/2 100 500 3000 0.82# C
RMDS8322 65520 8-32 x 2 100 500 3000 0.93# C
RMDS102412 65434 10-24 x 1/2 100 500 4000 0.49# C
RMDS102434 65438 10-24 x 3/4 100 500 4000 0.62# C
RMDS10241 65442 10-24 x 1 100 500 4000 0.75# C
RMDS1024114 65446 10-24 x 1-1/4 100 500 3000 0.95# C
RMDS1024112 65450 10-24 x 1-1/2 100 500 3000 1.03# C
RMDS10242 65454 10-24 x 2 50 250 1500 0.66# C
RMDS103238 65458 10-32 x 3/8 100 500 4000 0.32# C
RMDS103212 65457 10-32 x 1/2 100 500 4000 0.49# C
RMDS103234 65464 10-32 x 3/4 100 500 4000 0.62# C
RMDS10321 65468 10-32 x 1 100 500 4000 0.75# C
RMDS1032114 65469 10-32 x 1-1/4 100 500 3000 0.85# C
RMDS1032112 65471 10-32 x 1-1/2 100 500 3000 0.94# C
RMDS10322 65467 10-32 x 2 50 250 1500 0.66# C
RMDS1412 65400 1/4 x 1/2 100 500 4000 0.97# C
RMDS1434 65404 1/4 x 3/4 100 500 3000 1.19# C
RMDS141 65408 1/4 x 1 100 500 3000 1.45# C
RMDS14114 65412 1/4 x 1-1/4 100 500 3000 1.69# C
RMDS14112 65416 1/4 x 1-1/2 50 250 1500 0.99# C
RMDS142 65420 1/4 x 2 50 250 1500 1.21# C
RMDS14212 65424 1/4 x 2-1/2 100 1000 2.73# C
6-32
8-32
Truss Head Slotted/Phillips (Combo) Machine Screws
Zinc Plated - PC 4005
DOT12_section_a:section_a 11/7/08 8:50 AM Page 5