Manualshelf

User Manual

ManualsBrandsDotworkz ManualsSecurity Camera AccessoriesD2-BASE
11121314151617181920
10
Installing Camera Bracket
Axis 233D PTZ
6. Now slide the camera bracket with the
camera into place to line up with 4 screws
holes from the standoffs.
7. Use (4) #8-32 screws (Phillips head) to
secure the bracket into place.
Tip: Insert (2) #8-32 screws in the front two
standoffs to provide a guide to slide the
camera bracket into. The last two corner
holes should line up and be secured last.
Continued . . . . . . . .
Again, make sure the camera
bracket is facing the right
direction.
Picture represents camera bracket orientation & how it is
secured. Don’t’ forget to mount your camera to the D2
camera bracket based on instructions.
Picture represents standoff location & camera
bracket orientation. Height of standoffs will vary
depending on camera used.