User Manual


6

Installing Camera Bracket
Axis 213 PTZ
Canon VB-C50iR
1. Install the Axis 213 PTZ or Canon VB-
C50iR camera onto the D2 Camera Bracket
with (2) #10-32 screws, (2) #10 Lock
Washers, and (2) #10 Locknut that are
included.
2. The Axis 213 PTZ or Canon VB-C50iR
camera requires a 2" spacing for optimal fit
and operation. Use (1) 1.5" standoffs and (1)
.5" standoffs that are provided to create a 2"
standoff. You will need to create 4 of these
with the included hardware.
Required components (see component
checklist): Part# 1,2,3,5,6,9,10,& 11
3. The 2" standoffs will be inserted on
the lower lens portion of the D2.
1.5"
.5"
4. Now slide the camera bracket with
the camera into place to line up with 4
screws from the standoffs.
5. Secure the plate by using (4) .75"
standoffs to lock the bracket in place.
The two front location will require the
use of (2) .25" washer.
This edge nests in arch at front of D2
This edge of the bracket faces back of the D2 enclosure
Picture represents standoff location & orientation.
Height of standoffs will vary depending on camera
used.
Picture represents camera bracket orientation & how it is
secured. Don’t’ forget to mount your camera to the D2
camera bracket based on instructions.
