Installation Manual

Foam Conduit Feed Plugs for ½” I.D. (PG-13) Conduit

Prevents Humid Air exchange from venting thru electrical conduit into Dotworkz sealed enclosures,

Thus eliminating condensation issues within Dotworkz sealed enclosures.

QUICK INSTALLATION GUIDE

VENT STOPPER PLUGS for Conduit

1) Pull wires to final installed length.

2) Open Vent Stop Plug and install over wire.

3) Pinch Plug to compress over wire, and insert into

conduit feed mouth.

4) Push plug into conduit mouth with finger

tips till it flush with outside of fitting

5) Repeat steps 1-4 for any other conduit

feeds as needed.

6) To assure an airtight seal, caulk around wires

and cables, coating entire plug surface with sealant.