User's Manual

www.doublesight.com

STEP

Box Contents

STEP

Specification

Check if all parts are included in the package.

Contact your sales representative if parts are missing.

Actual components may look different from the pictures above.

Monitor Stand

Dual Monitor Stand

DS-219STA

Dual Monitor Stand

M4-10 BOLT

10EA

DUAL STAND

1Set

CABLE TIE

6 EA

4MM WRENCH

1EA

CABLE VELCRO

2 EA

VESA BRACKET

2EA

Application Notes

Weight Capacity : 22lbs per monitor (Max)

Maximum LCD Width : 18.0” per monitor (Max)

VESA

75mm X 75mm

100mm X 100mm

sales

* Monitors are not included

PAGE 1
Dual Monitor Stand STEP 1 Box Contents STEP 2 Specification Application Notes Weight Capacity : 22lbs per monitor (Max) Maximum LCD Width : 18.0” per monitor (Max) VESA 75mm X 75mm 100mm X 100mm Monitor Stand DUAL STAND 1Set VESA BRACKET 2EA M4-10 BOLT 10EA 4MM WRENCH 1EA CABLE TIE 6 EA CABLE VELCRO 2 EA sales * Monitors are not included Dual Monitor Stand DS-219STA Check if all parts are included in the package. Contact your sales representative if parts are missing.
PAGE 2
3 Installation 1. Attach VESA Bracket to each monitor 2. Join Monitor to the Stand. 3. Set Monitor View Angles You can now adjust the monitors to your preferred viewing angle. :// http w w Tighten both bolts with the wrench (4MM) after putting the head of the bolts through the appropriate key holes as shown( ). 1 0 0 x 1 0 0 7 5 x 7 5 h ig w.d oubles When adjusting the height, please loosen the handle, set the proper hight and tighten the handle.