User Manual www.doughty-engineering.co.uk T28870 Marquee Clamp Version 08/11 www.doughty-engineering.co.
Parts & Features Clamp Knob Base M10 - 150 Kg M12 - 150 Kg M14 - 150 Kg M12 - 30 Kg M10 - 30 Kg www.doughty-engineering.co.
Usage 1. Never exceed the Safe Working Load (SWL) shown on the clamp. (See previous page) 2. Only use the clamp within its designed parameters. (Clear Span Marquee Profile) 3. All clamps should be visually inspected before use. In the event of any damage the clamp should be taken out of service and returned to an ‘Approved Doughty Service Agent’ for inspection. (see our dealer locator on our web site for a comprehensive list of Authorised Service Agents) 4.
150.0 137.0 50 - 110mm M14 SWL 150Kg 57.0 150.0 M10 SWL 30Kg M12 SWL 30Kg M12 SWL 150Kg 13.0 M10 SWL 150Kg 60.0 MARQUEE CLAMP ZINC PLATED SEE DWG 1.30 KG STEEL www.doughty-engineering.co.
Declaration of Conformity Doughty Engineering Limited CROW ARCH LANE, RINGWOOD, HANTS, BH24 1NZ. ENGLAND Telephone: +44 (0) 1425 478961 Fax: +44 (0) 1425 474481 www.doughty-engineering.co.uk email:sales@doughty-engineering.co.
Contact Doughty Engineering Ltd Crow Arch Lane Ringwood, Hampshire, BH24 1NZ Tel: +44 (0) 1425 478961 Fax: +44 (0) 1425 474481 email: sales@doughty-engineering.co.uk Web: www.doughty-engineering.co.uk Note: Whilst every effort has been made to ensure that the information contained within this manual is correct, Doughty Engineering does not accept any liability for errors or omissions. Specifications and technical data are intended for guidance purposes only and may vary. www.doughty-engineering.co.