User's Manual

ManualsBrandsDouglas Lighting Controls ManualsElectronicsBTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy.

1

2

3

4

5

6

7

8

4

Dimensions

The BTM-RDR-A is a single sided PCB module that contains 4 circuit connections on the left side (see

Module Pinout diagram below) for 12VDC input and 0-10V dimming control. The 12VDC input pads are

referred to as AUX+ and AUX-. The 0-10V dimming pins are referred to as DIM+ and DIM-. Internal to the

BTM-RDR-A module the AUX- and DIM- are connected together to the onboard GND.

The BTM-RDR-A module also has 4 pads (2 top, 2 bottom) for securing the module to the host PCB.

These pads also are connected to the module’s onboard GND.