Manualshelf

User's Manual

ManualsBrandsDouglas Lighting Controls ManualsElectronicsBTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy.
123456789
7
Commissioning
The BTM-RDR-A module is part of Douglas Lighting Controls Bluetooth lighting control ecosystem and
therefore interoperates with other Douglas Bluetooth products such as fixture controllers, other
occupancy and daylight sensors, and switches. The BTM-RDR-A also can be integrated with Douglas
Lighting Controls Dialog lighting control solution through Douglas Lighting Controls’ BT-GTWY-A
Bluetooth-Dialog gateway and a Dialog WLC-4150 Lighting Control Unit (LCU).
The BTM-RDR-A is configured using the Douglas Lighting Controls BTCC Bluetooth commissioning
application available for iOS mobile devices through the Apple Store. The BTCC application is used to:
- group the BTM-RDR-A with other devices in a common area,
- enable occupancy detection
- set occupancy range sensitivity
- set the occupancy mode (Occupancy, Vacancy, Partial ON, Partial OFF),
- set occupancy timeout,
- set the Zone of operation within the area including minimum and maximum lighting trim levels,
- enable photo inhibit operation and set photo inhibit levels,
- enable response to Daylight Harvesting from other daylight sensors,
- enable emergency power support,
- enable dimming level reporting to an LCU, and
- enable iBeacon transmission and adjust related iBeacon parameters for location services.
See the Douglas Lighting Controls BTCC Field Manual available on the Douglas Lighting Controls website
for a description of how to use the application to commission and configure the BTM-RDR-A module.