Manualshelf

User's Manual

ManualsBrandsDouglas Lighting Controls ManualsElectronicsBTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy.
123456789
9
RF Rules
The BTM-RDR-A complies with FCC Title 47 Part 15 Subpart C for Intentional Radiators and IC RSS-247
Issue 2.
Additional Testing
The BTM-RDR-A is only authorized for the specific RF rules specified above. It is the OEM’s responsibility
for compliance to any other FCC or IC rules that apply to the host product not covered by the
BTM-RDR-A module certification.
Conditions for Use
The BTM-RDR-A is intended only for the use described in this document, as a control device for
commercial LED light fixtures. Modification to the module in any way is not authorized.
Particularly the BTM-RDR-A must be used with the included Bluetooth antenna.
OEM Labeling
The BTM-RDR-A has been tested to the FCC and Industry Canada rules specified above. The OEM is
responsible for ensuring the host product is labelled on the exterior with the following:
Contains FCC ID: 2AV38-BTMRDRA
Contains IC: 25994-BTMRDRA