Operation Manual
Occasional routines
58 Gallery 310 10.2010
• For a heavily soiled canister, unscrew
locking nuts on front side of canister and
remove the outlet spouts(fig. 74).
• Unscrew locking nuts on back side of
canister(fig. 74).
• Remove partition wall inside canister(fig.
75).
• Loosen the retaining screw of each auger
(fig. 75) and carefully remove the dosing
systems.
Take care not to damage the
mixing wires.
Do not use a brush.
• Clean the canister in hot water.
• Dry the canister.
• Assemble canister and dosing systems.
• Fill canister with freshbrew ingredient and
reinsert in machine.
74 75