Operation Manual

A
B
C
D
E
F
G
H I
J
K
L M
09.20015.057
P
N
O
A Flue
B Fireproof material or connector
C Cover plate
D Insulation material (minimum 5 cm)
E Fireproof wall
F Combustible wall
G Ventilation space (minimum 15 mm)
H Fireproof ceiling
I Combustible ceiling
J Convection air opening
K Insulation (optional)
L Fireproof base
M Combustible base
N Opening to prevent pressure build-up
O Connection pipe
P Convection air to another area
Fitting outer frame
The appliance can be supplied with a three- or four-
sided outer frame. An optional decorative frame can
also be supplied and that is fitted to the outer frame.
1. Fit the outer frame by fitting the sides together
with two screws; see next figure.
2. Fit the decorative frame by joining the sides of the
frame with a connecting element and fastening it
with the two screws (A) of the connecting ele-
ment; see next figure.
3. Centre the decorative frame on the outer frame;
see next figure.
4. Put three supporting plates on each side between
the decorative and the outer frame; see next fig-
ure.
Subject to change because of technical improvements
15