Operating Instructions and Installation Instructions

Door lock

The appliance is supplied with the latch button (4)

installed. The door is opened by pressing in the latch

button. As the latch button becomes warm during use,

a glove has been supplied which you can use to pro-

tect your hand.

Installation

General preparation

Please check the appliance immediately after deliv-

ery for damage during transport or any other dam-

age or defects. The appliance is attached to the

pallet with screws at the bottom.

If you detect transport damage or any other

damage or defects, do not use the appliance

and notify the supplier.

Remove removable parts (fire-resistant inner

plates, fire grate, top plate, ashtray) from the appli-

ance before starting installation.

It is easier to move the appliance and to avoid

damage if the removable parts have been

removed.

Note the location of the removable parts, so

that you can re-position the parts in the correct

place later on.

09-20021-011

1. Open the door; see the following figure:

09-20021-012

2. Remove the fire-resistant inner plates; see the fol-

lowing figure:

a. First remove the baffle plate (09).

The baffle plate is attached at the top with a

metal clip. This is to avoid damage during

transit.

b. Remove the inner plates (10), (11), (07) and

(08) at the side and at the back.

c. Remove the fire basket at the side (02) and

(03) and at the front (04), (05) and (06).

d. Remove the grate and the ash pan (01) and

(12).

Vermiculite inner plates are light and tend

to be ochrous in colour on delivery. They

insulate the combustion chamber to boost

combustion.

Subject to change because of technical improvements