Dimensions Guide
See how FROTH-PAK
™
checks out against the competition
Low-pressure portable spray polyurethane insulation comparisons
Dow Building Solutions
Solutions
Applications
DOW FROTH-PAK
™
FOAM INSULATION
(NFPA 286)
CONVENIENCE
TOUCH ’N SEAL
TVM
MEGA FILL
TIGER FOAM
(NFPA 286)
FOMO
HANDI FOAM
(NFPA 286)
CODE REPORT:
ESR3228
ESR3052 N/A ESR3183 ESR2717
ROOF/WALL
JUNCTURE
Maximum 2” thick and
6” high by unlimited
width at the juncture
No information No information
ROOF
PENETRATIONS
Limited to non-fire-
resistive-rated roof
assemblies
No information No information
Maximum 2” annular
space and 6” high
No information No information
Maximum 2” of height
exposed below roof deck
No information No information
CONDUIT
INTERNAL
SEALING
Limited to non-fire-
resistive-rated roof
assemblies
No information No information
Maximum 2” thick and
6” high
No information No information
WALL/FLOOR
JUNCTURE
Maximum 2” thick and
2” high by unlimited
width at the juncture
No information No information
No information
Does not act as a fire-
resistant joint system
No information No information
No information
Can be installed on
top of a fire-resistant
joint system
No information No information
No information
DUCT JOINT
SEALING
Maximum 2” thick and
6” wide at each joint
No information No information
In attics and crawl
spaces, no ignition
barrier is required
No information No information
Use is limited to IRC
construction
No information No information
SILL PLATES
AND HEADERS
Can be applied to sill
plates and headers
up to 2” maximum
thickness
ATTICS AND
CRAWL SPACES
Must be covered with
thermal or ignition
barrier
1
2
3
1 Or use Flame Seal TB, Touch ’N Seal Ignition Barrier, No Burn Plus XD
2 Or use Tiger Foam Ignition Barrier Intumescent Coating
3 Or use Handi Foam Ignition Barrier
P RODUCT COMPARISON | United States | COMMERCIAL/RESIDENTIAL
223142.indd 1 6/26/14 11:42 AM