User guide

Dow Building Solutions
Pressure Gauge
“B” Tank
“B” Pressure Regulator
“B” Tank Nitrogen
Hose (mark hose
ends with yellow
& blue electrical tape)
Plastic Protective Cap.
(Remove before
attaching hoses)
WARNINGS:
NEVER use oxygen regulators on cylin-
ders of which the gas pressure exceeds
3000 pounds per square inch.
NEVER use oil or petroleum base grease
on regulator, inlet connection, or cylinder
valve. An explosion or fire could result. The
lubricant used on this regulator adjusting
screw is Dow-Corning No. 44 silicone
grease which is a non-petroleum base
grease.
NEVER stand in front of, or behind a
regulator while opening the cylinder valve.
DO NOT use WD40
®
or DC44 on any
INSTAFLO
™
Gun parts.
®
Trademark of the WD40 Company.
A2