Installation & Assembly

Installation Manual

Acrylic Freestanding Bathtub

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Preperation of Drain Tail Piece

Install Bathtub

Waste drain pipe must always be installed agreeing to

placement of the bathtub before drilling the hole for the

waste drain pipe.

Install 1 1/2” rubber slip gasket over the drain waste vent.

Cut tailpiece to desired length (will need to adjust for each

installation).

Connect the tailpiece assembly to waste vent.

bottom of the tub.

Carefully set tub into position and connect the drain. Finish

the installation of the tail -piece Installation.

Once bathtub is set into place, apply silicone or caulk

around the edge of the base.

Step 6.

Step 7.

Pop up cap

Top Drain Body

Rubber Drain Gasket

Bottom Drain Body

Tailpiece

Waste Pipe Sleve

Drain Pipe

Floor

Trap