Installation & Assembly

Top-Mount / Under-Mount Sinks
INSTALLATION GUIDE
Page 2 of 4
Step 3
Using a saber saw, start cutting from the drilled hole along the cutout line. Support cutout until the cut is
completed.
Step 4
Set the sink temporarily into the cutout opening to verify fit (Left is top-mount installation and right is
under-mount installation). The sink rim must set uniformly on the counter top. If the sink does not fit, enlarge the
cutout opening carefully
Step 5
Install faucets and other accessories such as a side spray or soap/lotion dispenser onto the sink.