Frequently Asked Questions

Step 2
Connect the Racing Wheel using the attached USB cable to an available USB port on your PC.
Windows will automatically connect to the wheel and you will get the message:
“Setting up your new device” and will install the appropriate driver. Once completed, Windows will report that
set up has finished for “Steering Wheel with Vibration”.
Step 3
On the Wheel press and hold both the buttons ‘select’ & ‘start’ at the same time. Continue to hold these down until
the update utility displays the Device Information as in the picture below. The Device Version is your current
wheel’s firmware level.
In this example, the wheel has firmware V1.08 and will be updated to V1.09.