User's Manual

17
6. Resetting pairing for Semi-wearable device & remote
6.1 Bluetooth pairing has been done before; reconnecting is
automatic after changing battery or turning on and off.
6.2 Resetting pairing for semi-wearable device and remote:
(note: Only one device can be paired each time; the same steps must be
repeated to pair the next device)：
6.2.1 First of all, to use a SIM card ejector pin or similar sharp
object to press the small hole in the A6 power
management box. When you hear the beep sound, you
can begin the pairing progress.
6.2.2 Afterwards, long press the C semi-wearable device
button until the C semi-wearable device’s blue LED
indicator light blinks quickly and then you will hear a long
deep sound. Pairing is completed when C semi-wearable
device’s blue LED indicator light turn to blink slowly.
6.2.3 Long press the E remote’s E1 power button until the E
remote’s blue LED indicator light blinks. Pairing is
completed when you hear a long beep sound.