User's Manual

Assembly guide
In the wired version, the grid and capsule can be unscrewed from the
handle and exchanged with a variety of adapters to fit professional
3rd-party wireless handles. In wireless versions, the grid and capsule
can be unscrewed from the adapter and exchanged with the DPA
Handle for wired use.
2. Unscrew the capsule from either the adapter or handle.
Don’t try to unscrew at the base below the capsule.
3. Attach the selected capsule to either the DPA Handle for wired
use or a DPA Adapter for a 3rd-party wireless handle.
Please note that all electric and acoustic specifications apply to the
wired DPA Handle unless otherwise stated. The DPA Handle is de-
signed with a permanent 3rd-order low-cut filter (-3 dB at 80 Hz) to
remove unwanted handling, pop and wind noise.
Wired to wireless
d:facto™ Handheld Microphones can be used both wired and
wireless with full flexibility. The microphone grid, the microphone
capsule and the preamplifier (either a DPA Adapter to 3rd-party
wireless handle or the DPA Handle for wired use) are all separate
components.
1. Unscrew the outer grid.
DUA0710G d:facto
™
Microphone Grid, Gold
DUA0710N d:facto
™
Microphone Grid, Nickel
DUA0710 d:facto
™
Microphone Grid
MMC4018V Microphone Capsule for Vocal,
Supercardioid
MMC4018VL Microphone Capsule for
Vocal, Supercardioid
FAAWI2B d:facto
™
Adapter WI2
FAASE5B d:facto
™
Adapter SE5
FAASL1B d:facto
™
Adapter SL1
FAASE2-ewB d:facto
™
Adapter SE2-ew
FAADPA2B d:facto
™
DPA Handle
DUA0703 Foam Windshield
for d:facto
™
DUA0715 Clip
for d:facto
™
Vocal Microphone