User's Manual

Adjusting the d:fine
TM
4266 & 4288
For the single-ear, just open the spring hook lightly, first place the slide behind your ear-
lobe (Pic. 1) and let go of the spring over your ear (Pic. 2). For the dual-ear, place the
headset behind your ears and place the springs like for the single-ear. Adjust the headset
mount by pulling or pushing the wires until it fits tightly (Pic. 3).
A directional headset should be mounted 2-3 cm (1 in) from the corner of the mouth to ensure
optimal sound quality.
3. The relief is pre-mounted with dual-ear headsets
and supplied with single-ear earsets.
2. Slide the cable into the relief cut.
Correct placement behind the earlobe
Pic. 1 Pic. 2 Pic. 3
See instruction video at
dpamicrophones.com/dfine
1. When using the dual-ear headset mount,
the supplied cable relief should be applied.