User's Manual
Cable maintenance
The cable is usually longer than required. Make sure that superfluous cable is wound
up in soft figure-of-eight loops (preferably 6-8 cm (2.5-3 in) diameter) and avoid kinks
in the cable.
Use Ecotech2 Multi Degreaser from Finish Line to remove residue from tape,
glue, or makeup on the cable. Do not bend the cable or rub it harshly, it may stress
the inner cores of the cable and cause them to break over time.
General maintenance
The d:fine
TM
Headset Microphones are resistant to high levels of humidity. How-
ever, care must be taken to keep the mic away from exposure to water and
cleaning fluids and to keep the mic head dry at all times. Do not use spray or use
fluid containing chemicals that could remove static electricity on or close to the
microphone. This could cause permanent damage.
MicroDot connectors and adapters
To provide users with safe and compact mounting of connec-
tors, all headsets from DPA are fitted with the MicroDot con-
nector as standard. A broad range of connection adapters is
oered as optional accessories for most wireless systems for
professional use. See dpamicrophones.com/adapters.
Please also note that standard hardwired solutions are available
for popular wireless systems;
03 : 3 pin LEMO
10 : TA-4F Switchcraft
34 : Mini-Jack