User's Guide

4


Follow Connect Power Adapter section to plug in DC INPUT jack of main unit,
Place the smart phone (wireless charging compatible) on the charging pad in
Vertical Position or Horizontal Position. the indicator will light which
indicates the Device is charging.
When the smart phone is indicated fully charging, please take away the device
from the charging pad.
NOTE:
In order to get more effective for wireless charging, please take off the protective
case from the mobile phone.
The above description is applicable to most wireless charging mobile phones, but there may
have discrepancies depending on the power consumption of different mobile phones and
versions of the operating system.
This unit features a USB port for charging your portable device (iPod, iPhone,
Android phone, etc.).
1. Plug the standard end of the USB cable (not included) into the USB port
located on the back of the unit. Plug the small end of the USB cable into the
charging port on the device you wish to charge.
2. Unplug the cable when your device is fully charged.
CAUTION:
Before charging, please refer to the user manual of the device you wish to
charge to make sure the charging current required does not exceed 1Amp (1,000
mA) of charging current. Overloading the charge circuit may damage the unit and
void the warranty.
Charging your smart phone or portable device
Wireless Charging your smart phone