User's Guide

6

1. In standby mode, press and hold the AL1 or AL2 button, the or icon will
light and the hour of the alarm time will blink to prompt for input.
2. Repeatedly tap the VoL- or VoL+ button to adjust the hour. Press and hold
the button for fast advance / reverse setting.
3. Tap the AL1 or AL2 button to confirm the hour setting, the minute digits will
blink to prompt for input.
4. Repeatedly tap the VoL- or VoL+ button to adjust the minute. Press and hold
the button for fast advance / reverse setting.
5. Press the AL1 or AL2 button to confirm and finish setting the alarm time. The
alarm indicator or will appear to indicate it is enabled.
6. To disable the alarm, in Standby mode, double tap the AL1 or AL2 button,
the relative alarm indicator or will disappear from display.
7. Tap AL1 or AL2 button again will enable the alarm.
8. After the alarm sounds, press the any buttons to turn the alarm off.
Snooze Function
1. When the alarm sounds, it can be temporarily stopped by pressing the
SNOOZE/SLEEP button. The display will show the “SNOOZE” indicator and
the relative alarm indicator or will be flashing.
2. The alarm will be delayed for 9 minutes and then come again.
3. This manual snooze operation can be repeated again and again.
1. In BT mode, press the SNOOZE / SLEEP button once, then the “SLEEP”
indicator will appear on the display.
2. Tap the SNOOZE / SLEEP button repeatedly to select the desired sleep time.
The sleep timer can be chosen from 15 - 60 minutes in 15 minute step. After
sleep timer selected, wait for 5 seconds to confirm. The “SLEEP” indicator
continues to appear on the Display. The unit will stop and go into Standby
mode automatically after selected sleep time has expired.
3. To check remained sleep time, simply press the SNOOZE / SLEEP button.
4. Press the button to switch off the unit before the selected sleep time
expires.
NOTE:
 If you touch the SNOOZE / SLEEP button once and the “SLEEP”
Alarm Setting
Sleep Timer Operation